Shoddy Work Hall of Shame
I’m having a problem in WordPress – most of my pages are all fine when I edit them but don’t show up when I publish and I can’t figure out why. The house tour can stay broken for now, but the h.
Studs too short? Cut blocks of wood and/or stack up scraps of plywood to fill the gaps!
Time to frame a wall. New wood or old? Let’s alternate them! (These studs are not the same size, but they didn’t screw the drywall into the studs anyway so it doesn’t matter)
Woodwork coming loose? Don’t push it into place and re-nail it, just caulk! Cracked plaster? Just find a scrap of drywall to cover most of the cracks, and some of your woodwork! Just line it up between/on the surrounding trim, drive screws in wherever the spirit moves you, and you’re done! Radiators are totally solid so no one will ever notice.
And then there’s the caulk. So much caulk. I wasn’t strong enough to pull apart the caulk on the living room radiator covers; had to cut it.
Normally how do you handle finishing floors around the radiator? You’d use special sanders to get around the low clearance. How did the previous owner do it? His… people just skipped it. And when they dropped globs of joint compound, dirt, pennies, and other odds and ends under it, they just polyurethaned right over them. This is what it looked like after I gave it a thorough cleaning.
It looks like someone kicked in the door to the front bedroom at some point. The jamb was all busted out around the strike plate. To fix this, long screws were driven through the destroyed wood into nothing. And there’s a lot of caulk on it, of course.
Then there are the front bedroom windows:
So what exactly are we looking at here? Lots of holes, obviously, and gorilla glue! Inside that, we have a very cheap window installed so crookedly (in a wall that’s actually square!) that it doesn’t even close. There are scraps of who knows what stacked up to reduce the size of the opening, and there are 1×3′s, that’s framing grade lumber, not what you’d ever have for decorative purposes, attached right to the tops of the window sills. I know this woodwork won’t survive being taken down, but I’ll be able to replicate it. Not just yet though because the front windows are staying until the brick is restored. And until I can afford the windows I want. And when I feel like doing another project. That could be a while.
Then there are the radiators. More bad paint. More joint compound gloop.
And I don’t have the steadiest hand, but look at this job cutting in with the paint around the stairs.
And, when you install stucco, install the flashing to take water out and over it, not as corner molding to drive it into the wall.
No Responses
That’s bad Chad.
Our finds Chez Nous have included 1) very well made and fitted but godawful ugly and has to come out , and 2) someone did DIY in the dark and under the influence of strong ale.
And of course almost all our walls are random rock and giant river pebbles
My eyes! My eyes! Oh, Chad. That is painful. It’s all bad, but the wood floors made me literally gasp.
I waited 2.5 years to have them refinished and the whole time had a looming fear that it wouldn’t sand out
I’d love to see an after photo. I like it when horror movies have a proper happily ever after. 😀
Oh I did that a while ago. I’ll dig some out for you.
Well there’s this one: https://chadscrookedhouse.wordpress.com/2015/11/10/my-old-floors-before-after-and-a-whole-lot-of-delerium/
The bad corner under the radiator is in this post: https://chadscrookedhouse.wordpress.com/2016/03/02/a-triumphant-end-to-phase-1/
It looks perfect now.
See, my blog was WAAAAAY more interesting a couple years ago.
They look so much better. What a mess!
The back bedroom windowsill is here: (I put a double window where there had been only 1, and got them on Craigslist since size was non-critical) https://chadscrookedhouse.wordpress.com/2015/07/26/the-irishmans-going-gangbusters/
Make sure your pages are included in your wordpress menu (appearance –> menu). if they’re not selected and “add(ed) to menu” they won’t show up. that’s my only thought at the moment.